Sony Stereo System 3 293 639 111 User Manual

3-293-639-11(1)  
Micro HI-FI  
Component  
System  
Operating Instructions  
CMT-BX30R  
© 2008 Sony Corporation  
 
Note on DualDiscs  
Disposal of waste  
batteries (applicable  
in the European  
A DualDisc is a two sided disc product  
which mates DVD recorded material on  
one side with digital audio material on  
the other side. However, since the audio  
material side does not conform to the  
Compact Disc (CD) standard, playback on  
this product is not guaranteed.  
Union and other  
European countries  
with separate  
collection systems)  
Music discs encoded with copyright  
protection technologies  
is product is designed to playback  
discs that conform to the Compact Disc  
(CD) standard. Recently, various music  
discs encoded with copyright protection  
technologies are marketed by some  
record companies. Please be aware that  
among those discs, there are some that  
do not conform to the CD standard and  
may not be playable by this product.  
is symbol on the battery or on the  
packaging indicates that the battery  
provided with this product shall not be  
treated as household waste. By ensuring  
these batteries are disposed of correctly,  
you will help prevent potentially negative  
consequences for the environment and  
human health which could otherwise be  
caused by inappropriate waste handling of  
the battery. e recycling of the materials  
will help to conserve natural resources.  
In case of products that for safety,  
WALKMAN” and “WALKMAN”  
logo are registered trademarks of Sony  
Corporation.  
MPEG Layer-3 audio coding  
technology and patents licensed from  
Fraunhofer IIS and omson.  
Windows Media is a registered  
trademark of Microsoſt Corporation  
in the United States and/or other  
countries.  
performance or data integrity reasons  
require a permanent connection with an  
incorporated battery, this battery should  
be replaced by qualified service staff only.  
To ensure that the battery will be treated  
properly, hand over the product at end-of-  
life to the applicable collection point for  
the recycling of electrical and electronic  
equipment.  
For all other batteries, please view the  
section on how to remove the battery from  
the product safely. Hand the battery over  
to the applicable collection point for the  
recycling of waste batteries.  
For more detailed information about  
recycling of this product or battery, please  
contact your local Civic Office, your  
household waste disposal service or the  
shop where you purchased the product.  
GB  
 
Guide to parts and controls  
is manual mainly explains operations using the remote, but the same operations can  
also be performed using the buttons on the unit having the same or similar names.  
Unit  
Front panel  
Top panel  
GB  
Continued  
 
 
Remote  
USB MEMORY indicator  
Lights up when an optional USB device  
is connected.  
(open/close) button (page 13)  
Press to open or close the disc tray.  
AUDIO IN jack (page 20)  
Connect to an optional audio  
component.  
PHONES jack  
Connect the headphones.  
(USB) port (page 15, 18, 34)  
Connect to an optional USB device.  
Playback buttons and function  
buttons  
Unit: USB  (play/pause)  
button (page 18)  
/(power) button (page 12, 24,  
29)  
Press to turn on the system.  
Press to select the USB function.  
Press to start or pause playback of an  
optional USB device.  
STANDBY indicator (page 21, 25)  
Lights up when the system is turned off.  
Remote: USB button (page 18)  
Press to select the USB function.  
Unit: CD  (play/pause)  
Remote sensor (page 25)  
button (page 13)  
Press to select the CD function.  
Press to start or pause playback of a disc.  
Remote: CD button (page 13)  
Press to select the CD function.  
GB  
 
Remote: (play) button,  
(pause) button  
ENTER button (page 12, 15, 16,  
17, 22, 23, 24)  
Press to enter the settings.  
Press to start or pause playback.  
TUNER/BAND button (page 14)  
Press to select the TUNER function.  
Press to select FM or AM reception  
mode.  
/(go back/go forward)  
button (page 13, 16, 17, 19, 22,  
24)  
Unit: AUDIO IN button (page 20)  
Press to select the AUDIO IN function.  
Press to select a track or file.  
Unit: TUNE +/(tuning) button  
FUNCTION button (page 14, 20)  
(page 14)  
Press to select the function.  
Remote: +/(tuning) button  
(page 14, 23)  
Press to tune in the desired station.  
Unit: CD-USB SYNC/REC1 button  
(page 15, 16)  
Press to record from a disc onto the  
connected optional USB device.  
+/(select folder) button  
(page 13, 19, 22)  
Press to select a folder.  
/(rewind/fast forward)  
button (page 13, 19)  
USB MENU button (page 16, 17)  
Press to erase audio files and folders from  
the connected optional USB device.  
Press to select which memory to read  
to if the USB device has more than one  
memory.  
Press to find a point in a track or file.  
Unit: VOL +/button (page 13,  
14, 18, 20)  
Remote: VOLUME +/button  
(page 13, 14, 18, 20)  
Press to adjust the volume.  
GB  
Continued  
 
PLAY MODE/TUNING MODE  
button (page 13, 14, 15, 19, 22,  
23)  
Press to select the play mode of a CD,  
MP3 disc or an optional USB device.  
Press to select the tuning mode.  
Battery compartment lid  
(page 11)  
CLEAR button (page 22)  
Press to delete a pre-programmed track  
or file.  
Sound buttons (page 21)  
Unit: DSGX button  
Remote: EQ button  
Press to select the sound effect.  
TUNER MEMORY button (page  
23)  
Press to preset the radio station.  
DISPLAY button (page 21)  
Unit: /CANCEL (stop/cancel)  
Press to change the information on the  
display.  
button (page 13, 14, 16, 17, 19)  
Remote: (stop) button (page  
13, 14, 16, 17, 19)  
Press to stop playback.  
SLEEP button (page 24)  
Press to set the Sleep Timer.  
CLOCK/TIMER SELECT button  
(page 24)  
CLOCK/TIMER SET button (page  
12, 24)  
Press to set the clock and the Play Timer.  
REPEAT/FM MODE button (page  
13, 14, 19)  
Press to listen to a disc, a single track or  
file repeatedly.  
Press to select the FM reception mode  
(monaural or stereo).  
GB  
 
Information on the display  
Function  
DSGX (page 21)  
Audio format  
Timer (page 24)  
Play mode (page 13, 19)  
CD-USB Recording (page 15, 16)  
Tuner reception mode (page 14)  
Tuner reception (page 14)  
Play/Pause  
Text information  
GB  
 
 
Getting Started  
Hooking up the system securely  
Right speaker  
or  
Left speaker  
Wall socket  
Speaker cord (Red/)  
Speaker cord (Black/)  
AM loop antenna  
FM lead antenna (Extend it horizontally.)  
White side for North American model  
Brown side for other regions  
10GB  
 
 
Antennas  
Find a location and an orientation that  
provide good reception, and then set up  
the antenna.  
Keep the antennas away from the speaker  
cords, the power cord and the USB cable  
to avoid picking up noise.  
Notes  
Speakers  
With normal use, the batteries should last for  
Insert only the stripped portion of the  
speaker cords into the SPEAKER jacks.  
about six months.  
Do not mix an old battery with a new one or  
mix different types of batteries.  
If you do not use the remote for a long period  
of time, remove the batteries to avoid damage  
from battery leakage and corrosion.  
Power  
For models with a voltage selector, set  
VOLTAGE SELECTOR to the local  
power line voltage.  
Connect the power cord to a wall socket.  
If the plug does not fit the wall socket,  
detach the supplied plug adaptor (only  
for models equipped with an adaptor).  
When carrying this system  
1
2
3
Remove a disc to protect the CD  
mechanism.  
Press CD  
function.  
to select the CD  
and DSGX  
Hold down VOL +  
on the unit, and press   
unit until “STANDBYappears.  
on the  
4
After “LOCKappears, unplug the  
power cord.  
To use the remote  
Slide and remove the battery  
compartment lid , and insert the two  
supplied R6 (size AA) batteries, side  
first, matching the polarities shown  
below.  
11GB  
 
Setting the clock  
Use buttons on the remote to set the  
clock.  
1
2
Press /  
system.  
to turn on the  
.
Press CLOCK/TIMER SET  
e hour indication flashes in the  
display.  
If “PLAY SET?” flashes in the display,  
press /  
repeatedly to  
select “CLOCK SET?” and then press  
ENTER  
.
3
4
Press /  
repeatedly  
to set the hour, and then press  
.
ENTER  
Use the same procedure to set  
the minutes.  
e clock settings are lost when you  
disconnect the power cord or if a  
power failure occurs.  
To display the clock when the system  
is off  
Press DISPLAY . e clock is displayed  
for about 8 seconds.  
1ꢀGB  
 
 
Other operations  
Basic Operations  
To  
Press  
Pause playback (or CD  on the  
unit) . To resume  
Playing a CD/MP3 disc  
play, press the button  
again.  
1
Select the CD function.  
.
Stop playback  
Press CD  
.
Select a folder  
on an MP3  
disc  
Select a track /  
or file  
+/  
.
2
Place a disc.  
Press   
on the unit, and place  
a disc with the label side up on the  
.
disc tray.  
Find a point in Hold down /  
a track or file  
during playback, and  
release the button at the  
desired point.  
Select Repeat REPEAT  
repeatedly  
Play  
until “REP” or “REP1”  
appears.  
To close the disc tray, press   
on  
the unit again.  
To change the play mode  
Do not force the disc tray closed with  
your finger, as this may damage the  
unit.  
Press PLAY MODE  
repeatedly while  
the player is stopped. You can select  
normal play (“ *” for all MP3 files  
in the folder on the disc), shuffle play  
3
4
Start playback.  
(“SHUF” or “  
play (“PGM”).  
*
SHUF*”), or program  
Press (or CD  on the unit)  
.
When playing a CD-DA disc,  
(SHUF)  
Play performs the same operation as normal  
(shuffle) play.  
Adjust the volume.  
Press VOLUME +/(or VOL +/on  
Notes on Repeat Play  
.
the unit)  
All tracks or files on a disc are played  
repeatedly up to five times.  
“REP1” indicates that a single track or file is  
repeated until you stop it.  
1ꢁGB  
Continued  
 
 
Notes on playing MPꢁ discs  
Do not save other types of files or  
unnecessary folders on a disc that has MP3  
files.  
Listening to the radio  
Folders that have no MP3 files are skipped.  
MP3 files are played back in the order that  
they are recorded onto the disc.  
e system can only play MP3 files that have  
a file extension of .MP3.  
If there are files on the disc that have the  
.MP3” file extension, but that are not MP3  
files, the unit may produce noise or may  
malfunction.  
e maximum number of:  
folders is 255 (including the root folder).  
MP3 files is 511.  
MP3 files and folders that can be  
contained on a single disc is 512.  
folder levels (the tree structure of files) is  
8.  
1
2
3
Select “FMor “AM.”  
Press FUNCTION (or TUNER/  
BAND on the unit)  
repeatedly.  
Select the tuning mode.  
Press TUNING MODE  
until AUTO” appears.  
repeatedly  
Tune in the desired station.  
Press +/(or TUNE +/on  
the unit) . Scanning stops  
automatically when a station is  
tuned in, and then “TUNED” and  
“STEREO” (for stereo programs only)  
appear.  
Compatibility with all MP3 encoding/writing  
soſtware, recording device, and recording  
media cannot be guaranteed. Incompatible  
MP3 discs may produce noise or interrupted  
audio or may not play at all.  
When you tune in a station that  
provides RDS services, the station  
name appears on the display  
(European model only).  
Notes on playing multisession discs  
If the disc begins with a CD-DA (or MP3)  
session, it is recognized as a CD-DA (or  
MP3) disc, and other sessions are not played  
back.  
A disc with a mixed CD format is recognized  
as a CD-DA (audio) disc.  
4
Adjust the volume.  
Press VOLUME +/(or VOL +/  
.
on the unit)  
To stop automatic scanning  
.
Press   
To tune in a station with a weak signal  
If “TUNED” does not appear and the  
scanning does not stop, press TUNING  
MODE  
repeatedly until AUTO” and  
“PRESET” disappear, and then press  
+/(or TUNE +/on the unit)  
repeatedly to tune in the desired station.  
To reduce static noise on a weak FM  
stereo station  
Press FM MODE  
repeatedly until  
“MONO” appears to turn off stereo  
reception.  
1ꢂGB  
 
 
When USB cable connection is  
necessary, connect the USB cable  
supplied with the USB device to be  
connected.  
Recording from a disc  
onto an USB device  
See the operation manual supplied  
with the USB device to be connected  
for details on the operation method.  
You can connect an optional USB device  
to the  
(USB) port  
on the unit and  
record music from a disc to the USB  
2
3
Select the CD function, then  
load the disc you want to  
record.  
device.  
You can record from a CD-DA disc or  
MP3 disc only.  
e audio format of files recorded by this  
system is MP3.  
e approximate size of the recording is  
about 1 MB per minute of recording time  
from a CD. e size may be larger when  
recording from an MP3 disc.  
See “Compatible USB devices with this  
system” (page 34) for a list of USB devices  
that can be connected to this system.  
Press PLAY MODE  
repeatedly  
to select the play mode when  
the CD player is stopped.  
e play mode automatically changes  
to normal play mode, if you start  
recording in shuffle play mode, repeat  
play mode or in program play mode  
(when no tracks or MP3 files are  
programmed).  
For details about the play mode, see  
To change the play mode” (page 13).  
Synchro Recording  
on  
4
5
Press CD-USB SYNC/REC1  
the unit.  
You can easily record an entire disc onto  
an USB device.  
“REC” flashes, and the display cycles  
through “CD SYNC,” “xxxMB Free”  
(remaining space on the USB device)  
and “Push Enter.”  
e USB device stands by for  
recording and the CD player pauses  
for play.  
1
Connect a recordable USB  
device to the (USB) port  
as shown below.  
.
Press ENTER  
Recording starts. When the recording  
is completed, the CD player and the  
USB device stop automatically.  
USB device  
1ꢃGB  
Continued  
 
 
To select the recording destination on  
the USB device  
Recording a single track or MP3  
file during playback (REC1)  
If the USB device has more than one  
memory (for example, internal memory  
and a memory card), you can select  
which memory to read to and then start  
recording.  
You can easily record the track or MP3  
file that is currently being played back  
onto an USB device.  
1
2
3
Connect the USB device to the  
1
2
Connect a recordable USB  
device to the (USB) port  
(USB) port  
.
.
Select the USB function.  
Select the CD function, then  
load the disc you want to  
record.  
.
Press USB  
Press USB MENU  
stop mode.  
on the unit in  
“Select?” appears. If an audio file or  
3
4
Select the track or MP3 file you  
want to record, then start play.  
a folder is selected, “Erase?” appears  
instead. Press /  
to select “Select?.”  
repeatedly  
Press CD-USB SYNC/REC1  
on  
.
4
5
Press ENTER  
the unit while the selected track  
or MP3 file is being played back.  
e name of a memory appears.  
e displayed name varies depending  
on the specifications of the USB  
device.  
“REC” flashes, and the display cycles  
through “REC 1,” “xxxMB Free”  
(remaining space on the USB device)  
and “Push Enter.”  
e USB device stands by for  
recording and the CD player pauses  
for play.  
Press /  
repeatedly to  
select the memory.  
Proceed to step 6 if only one memory  
can be selected.  
To cancel this operation, press   
.
.
5
Press ENTER  
.
6
7
Press ENTER  
Recording starts. When the recording  
is completed, the CD player continues  
to play.  
Start recording by following steps 2  
thorough 5 of “Synchro Recordingor  
“Recording a single track or MP3 file  
during playback (REC1).”  
To stop recording  
.
Press   
1ꢄGB  
 
To remove the USB device  
Folder and file generation rules  
When first recording to an USB device,  
a “MUSIC” folder is created directly  
below the “ROOT.” Folders and files are  
generated within this “MUSIC” folder  
as follows according to the recording  
method.  
1
2
3
Select the USB function.  
Press USB  
.
Hold down   
on the unit in stop  
mode until “No Device“ appears.  
Remove the USB device.  
Synchro Recording1)  
Recording Folder name File name  
source  
To erase audio files or folders from the  
USB device  
MP3  
Same as the recording source2)  
“CDDA001”3) “TRACK001”4)  
You can erase audio files or folders from  
the USB device.  
CD-DA  
REC1 recording  
1
2
3
Connect a recordable USB device to  
Recording Folder name File name  
source  
.
the  
(USB) port  
Select the USB function.  
MP3  
Same as the  
recording  
source2)  
.
Press USB  
“REC1”5)  
Press /  
or  
+/  
CD-DA  
“TRACK001”4)  
repeatedly to select the audio file or  
folder you want to erase.  
1)  
In Program Play mode, the folder name is  
“PGM_xxx,” and the file name depends on  
the recording source (CD-DA disc or MP3  
disc).  
on the unit.  
4
5
Press USB MENU  
“Erase?” appears.  
2)  
3)  
Up to 32 characters of the name are assigned.  
.
Press ENTER  
Folder numbers are assigned serially  
thereaſter up to the maximum 999 (including  
the “ROOT” and “MUSIC” folders).  
File numbers are assigned serially thereaſter.  
A new file is recorded in the “REC1” folder  
each time REC1 recording is performed.  
Track Erase?” or “Folder Erase?”  
appears in the display.  
4)  
5)  
To cancel the erase operation, press  
.
.
6
Press ENTER  
e selected audio file or folder is  
erased.  
1ꢅGB  
Continued  
 
Notes  
Do not remove the USB device during  
recording or erase operations. Doing so  
may corrupt the data on the USB device or  
damage the USB device itself.  
Do not connect the system and the USB  
device through an USB hub.  
When recording from a CD, the tracks  
are recorded as 128 kbps MP3 files. When  
recording from an MP3 disc, MP3 files  
are recorded with the same bit rate as the  
original MP3 files.  
While recording from an MP3 disc, no sound  
is output and “High Speed” appears.  
Listening to music of  
an USB device  
You can listen to music stored in the USB  
device.  
e audio formats that can be played  
back by this system are as follows:  
MP3*/WMA*/AAC*  
See “Compatible USB devices with this  
system” (page 34) for a list of USB devices  
that can be connected to this system.  
* Files with copyright protection (Digital  
Rights Management) cannot be played by  
this system.  
Files downloaded from an online music store  
may not be played by this system.  
CD text information is not recorded in the  
created MP3 files.  
If you cancel the recording partway, an  
MP3 file is created up to the point when the  
recording was stopped.  
Recording stops automatically if:  
the USB device runs out of space during  
1
2
Select the USB function.  
recording.  
Press USB  
.
the number of audio files on the USB  
device reaches the limit for the number  
that the system can recognize.  
e maximum number of audio files and  
folders that can be contained on a single USB  
device is 999 (including the “ROOT” and  
“MUSIC” folders).  
e maximum number of audio files and  
folders may vary depending on the audio file  
and folder structure.  
You cannot erase audio files and folders in  
shuffle play mode or program play mode.  
If the folder to be erased contains non-MP3/  
WMA/AAC format files or sub folders, these  
are not erased.  
Connect an optional USB device  
.
to the (USB) port  
When the USB device is connected,  
the display changes as follows:  
“Reading”  
“Storage Drive*”  
* When connecting USB storage media,  
the volume label is displayed next if  
recorded.  
Note  
It may take about 10 seconds before  
“Reading” appears depending on the type  
of USB device connected.  
If a folder or file that you are trying to record  
already exists on the USB device with the  
same name, a sequential number is added  
aſter the name without overwriting the  
original folder or file.  
3
4
Start playback.  
Press (or USB  on the unit)  
.
Adjust the volume.  
Press VOLUME +/(or VOL +/on  
.
the unit)  
1ꢆGB  
 
 
Notes on the USB device  
Other operations  
You cannot change the play mode during  
playback.  
To  
Press  
Some time may be needed to start playback  
when:  
the folder structure is complex.  
the memory capacity is excessive.  
When the USB device is inserted, the system  
reads all the files on the USB device. If there  
are many folders or files on the USB device,  
it may take a long time to finish reading the  
USB device.  
Do not connect the system and the USB  
device through an USB hub.  
With some connected USB devices, aſter an  
operation is performed, there may be a delay  
before it is performed by this system.  
is system does not necessarily support all  
the functions provided in a connected USB  
device.  
Pause playback (or USB  on  
the unit) . To resume  
play, press the button  
again.  
. To resume  
Stop playback  
play, press (or  
USB  on the unit)  
*. To cancel resume  
play, press   
again.  
Select a folder  
Select a file  
.
+/  
/  
.
Find a point in Hold down /  
a file  
during playback,  
and release the button  
at the desired point.  
e playback order for the system may differ  
Select Repeat REPEAT  
repeatedly  
from the playback order of the connected  
Play  
until “REP” or “REP1”  
appears.  
USB device.  
Always hold down   
on the unit and  
make sure that “No Device” appears before  
removing the USB device. Removing the USB  
device while “No Device” is not displayed  
may corrupt the data on it or damage the  
USB device itself.  
Remove the  
USB device  
Hold down   
on  
the unit until “No  
Device” appears, then  
remove the USB device.  
Do not save other types of files or unnecessary  
* When playing a VBR MP3/WMA file,  
the system may resume playback from a  
different point.  
folders on an USB device that has audio files.  
Folders that have no audio files are skipped.  
e maximum number of audio files and  
folders that can be contained on a single USB  
device is 999 (including the “ROOT” and  
“MUSIC” folders).  
To change the play mode  
Press PLAY MODE  
repeatedly while  
e maximum number of audio files and  
folders may vary depending on the file and  
folder structure.  
the USB device is stopped. You can select  
normal play (“ ” for all files in the  
folder on the USB device), shuffle play  
(“SHUF” or “  
play (“PGM”).  
SHUF”), or program  
1ꢇGB  
Continued  
 
e audio formats that you can listen to with  
this system are as follows:  
MP3: file extension .mp3”  
Windows Media Audio file: file extension  
.wma”  
Using optional audio  
components  
AAC: file extension .m4a”  
1
Connect additional audio  
component to the AUDIO  
Note that even when file names have the  
above file extensions, if the actual file differs,  
the system may produce noise or may  
malfunction.  
Compatibility with all encoding/writing  
soſtwares, recording devices, and recording  
media cannot be guaranteed. Incompatible  
USB device may produce noise or interrupted  
audio or may not play at all.  
IN jack  
on the unit using  
an audio analog cord (not  
supplied).  
2
3
Turn down the volume.  
Press VOLUME (or VOL on the  
.
unit)  
Select the AUDIO IN function.  
Press FUNCTION (or AUDIO IN on  
the unit)  
repeatedly.  
4
5
Start playing the connected  
component.  
Adjust the volume.  
Press VOLUME +/(or VOL +/on  
.
the unit)  
ꢀ0GB  
 
 
Adjusting the sound  
Changing the display  
To add a sound effect  
To  
Change  
Press  
DISPLAY  
repeatedly  
To  
Press  
information on when the system is on.  
Generate a  
more dynamic  
sound  
DSGX  
on the unit.  
the display1)  
Check the  
DISPLAY  
when  
clock when the the system is off2). e  
(Dynamic  
Sound  
system is off  
clock is displayed for 8  
seconds.  
Generator  
X-tra)  
1)  
For example, you can view CD/MP3 disc  
information, such as;  
Set the sound EQ  
effect  
repeatedly  
to select “BASS”  
track or file number during normal play.  
track or file name (“ ”) during normal play.  
artist name (“ ”) during normal play.  
album or folder name (“  
play.  
or “TREBLE,” and  
then press +/  
repeatedly to adjust the  
”) during normal  
level.  
total playing time while the player is  
stopped.  
e STANDBY indicator  
lights up when the system is off.  
2)  
on the unit  
Notes on the display information  
Characters that cannot be displayed appear  
as “_.  
e following are not displayed:  
total playing time for a CD-DA disc  
depending on the play mode.  
total playing time and remaining playing  
time for an MP3 disc and USB device.  
e following is not displayed correctly:  
folder and file names that do not follow  
either the ISO9660 Level 1, Level 2 or  
Joliet in the expansion format.  
e following are displayed:  
ID3 tag information for MP3 files when  
ID3 version 1 and version 2 tags are used  
(up to 62 characters for an MP3 disc).  
e Russian model can display  
information in Russian characters, but the  
characters may not be displayed correctly  
for discs created with some encoding/  
writing soſtware and some recording  
device.  
ꢀ1GB  
 
 
4
Press ENTER  
to add the track  
Other Operations  
or file to the program.  
CD  
Creating your own  
 . ” appears when the total  
program time exceeds 100 minutes  
for a CD, or when you select a CD  
track whose number is 21 or over, or  
when you select an MP3 file.  
program  
(Program Play)  
1
Select the desired function.  
USB  
e total program time cannot be  
displayed, so “ . ” appears.  
CD  
Press CD  
function.  
to select the CD  
5
6
Repeat steps 3 through 4 to  
program additional tracks or  
files, up to a total of 25 tracks or  
files.  
USB  
Press USB  
function.  
to select the USB  
repeatedly  
until “PGMappears while the  
system is stopped.  
2
3
Press PLAY MODE  
To play your program of tracks  
or files, press   
.
e program remains available until  
you open the disc tray or remove  
the USB device. To play the same  
Press /  
repeatedly  
until the desired track or file  
number appears.  
.
program again, press   
When programming files, press  
To cancel Program Play  
+/  
repeatedly to select the  
Press PLAY MODE  
repeatedly until  
desired folder, and then select the  
desired file.  
Example: When programming tracks  
on a CD  
“PGM” disappears while the system is  
stopped.  
To delete the last track or file of the  
program  
Press CLEAR  
stopped.  
while the system is  
Selected track or file number Total playing time of  
program (including  
selected track or file)  
ꢀꢀGB  
 
 
6
To call up a preset radio  
Presetting radio  
stations  
You can preset your favorite radio  
stations and tune them in instantly  
by selecting the corresponding preset  
number.  
Use buttons on the remote to preset  
stations.  
station, press TUNING MODE  
repeatedly until “PRESET”  
appears, and then press +/  
repeatedly to select the desired  
preset number.  
1
Tune in the desired station (see  
“Listening to the radio(page  
14)).  
.
2
Press TUNER MEMORY  
Preset number  
3
Press +/  
repeatedly to  
select your desired preset  
number.  
If another station is already assigned  
to the selected preset number,  
the station is replaced by the new  
stations.  
.
4
5
Press ENTER  
Repeat steps 1 through 4 to  
store other stations.  
You can preset up to 20 FM and 10  
AM stations.  
e preset stations are retained  
for about half a day even if you  
disconnect the power cord or if a  
power failure occurs.  
ꢀꢁGB  
 
 
5
6
Use the same procedure as in  
step 4 to set the time to stop  
playing.  
Using the Timers  
e system offers two timer functions.  
If you use the Play Timer with the Sleep  
Timer, the Sleep Timer has priority.  
Select the sound source.  
Press /  
repeatedly until  
Sleep Timer:  
the desired sound source appears, and  
You can fall asleep to music. is  
function works even if the clock is not  
set.  
then press ENTER . e display  
shows the timer settings.  
to turn off the  
7
Press /  
system.  
Press SLEEP  
repeatedly.  
If you select AUTO,” the system  
automatically turns off aſter the current  
disc or USB device stops or in 100  
minutes.  
e system turns on 15 seconds  
before the preset time. If the system is  
on at the preset time, the Play Timer  
will not play.  
Play Timer:  
To activate or check the timer again  
You can wake up to CD, tuner or optional  
USB device at a preset time.  
Use buttons on the remote to control the  
Play Timer. Make sure you have set the  
clock.  
Press CLOCK/TIMER SELECT , press  
/repeatedly until “PLAY  
SEL?” appears, and then press ENTER  
.
1
Prepare the sound source.  
To cancel the timer  
Prepare the sound source, and then  
Repeat the same procedure as above until  
“TIMER OFF?” appears, and then press  
press VOLUME +/  
to adjust the  
volume.  
.
ENTER  
To start from a specific track or file,  
create your own program (page 22).  
To change the setting  
Start over from step 1.  
.
2
3
Press CLOCK/TIMER SET  
Tip  
Press /  
repeatedly  
e Play Timer setting remains as long as the  
setting is not canceled manually.  
to select “PLAY SET?,and then  
.
press ENTER  
“ON TIME” appears, and the hour  
indication flashes.  
4
Set the time to start playing.  
Press /  
repeatedly to set  
the hour, and then press ENTER  
e minute indication flashes. Use the  
.
procedure above to set the minutes.  
ꢀꢂGB  
 
 
Severe hum or noise.  
Move the system away from sources of  
Others  
noise.  
Connect the system to a different wall  
socket.  
Install a noise filter (available  
separately) to the power cord.  
Troubleshooting  
Make sure the power cord and  
speaker cords are correctly and firmly  
connected.  
1
The remote does not function.  
Remove any obstacles between the  
on  
2
Find your problem in the checklist  
below, and take the indicated  
corrective action.  
remote and the remote sensor  
the unit, and position the unit away  
from fluorescent lights.  
If the issue persists, contact your  
nearest Sony dealer.  
Point the remote at the system’s sensor.  
Move the remote closer to the system.  
If the STANDBY indicator flashes  
Immediately unplug the power cord,  
and check the following items.  
If your system has a voltage  
selector, is the voltage selector set to  
the correct voltage?  
The STANDBY indicator  
remains lit  
after unplugging the power cord.  
e STANDBY indicator  
may not  
turn off immediately aſter unplugging  
the power cord. is is not a  
malfunction. e indicator will turn off  
aſter about 40 seconds.  
Are you using only the supplied  
speakers?  
CD/MP3 player  
Is anything blocking the ventilation  
holes on the top or back of the  
system?  
The sound skips, or the disc will not  
play.  
Wipe the disc clean, and replace it.  
Move the system to a location away  
from vibration (for example, on top of  
a stable stand).  
Aſter the STANDBY indicator  
stops flashing, reconnect the power  
cord, and turn on the system. If the  
issue persists, contact your nearest  
Sony dealer.  
Move the speakers away from the  
system, or place them on separate  
stands. At high volume, speaker  
vibration may cause the sound to skip.  
General  
Sound comes from one channel,  
or the left and right volumes are  
unbalanced.  
Place the speakers as symmetrically as  
possible.  
Connect only the supplied speakers.  
ꢀꢃGB  
Continued  
 
 
Play does not start from the first  
track.  
Turn off the system and remove the  
USB device. If the USB device has a  
power switch, turn the USB device  
off and then on again aſter removing  
it from the system. en perform  
recording again.  
If the recording and erase operations  
are repeated multiple times, the file  
structure within the USB device  
becomes fragmented. Refer to the USB  
device operation manual for how to  
deal with this problem. If the problem  
persists, contact your nearest Sony  
dealer.  
Press PLAY MODE  
repeatedly until  
both “PGM” and “SHUF” disappear to  
return to normal play.  
Starting playback takes more time  
than usual.  
e following discs take a longer time  
to start playback.  
a disc recorded with a complicated  
tree structure.  
a disc recorded in multisession  
mode.  
a disc that has not been finalized (a  
Recording to an USB device results in  
an error.  
You are using an unsupported USB  
device. See “Compatible USB devices  
with this system” (page 34) for the  
supported device types.  
disc to which data can be added).  
a disc that has many folders.  
USB device  
You cannot start recording to an USB  
device.  
e following problems may have  
occurred.  
Turn off the system and remove the  
USB device. If the USB device has a  
power switch, turn the USB device  
off and then on again aſter removing  
it from the system. en perform  
recording again.  
e USB device was disconnected  
or the power was turned off during  
recording. Delete the partially-  
recorded file, and record again. If this  
does not fix the problem, the USB  
device may be broken. Refer to the  
USB device operation manual for  
how to deal with this problem. If the  
problem persists, contact your nearest  
Sony dealer.  
e USB device is full.  
e number of files and folders on  
the USB device has reached the  
upper limit.  
e USB device is write-protected.  
Recording is stopped before it is  
finished.  
You are using an unsupported USB  
device. See “Compatible USB devices  
with this system” (page 34) for the  
supported device types.  
e USB device is not formatted  
correctly. Refer to the USB device  
operation manual for how to format.  
ꢀꢄGB  
 
Files or folders on the USB device  
cannot be erased.  
Check if the USB device is write-  
protected.  
e USB device was disconnected  
or the power was turned off during  
the erase operation. Delete the  
partially-erased file. If this does not  
fix the problem, the USB device may  
be broken. Refer to the USB device  
operation manual for how to deal with  
this problem. If the problem persists,  
contact your nearest Sony dealer.  
There is no sound.  
e USB device is not connected  
correctly. Turn off the system , then  
reconnect the USB device and check if  
the USB MEMORY indicator  
up.  
lights  
There is noise, skipping, or distorted  
sound.  
Turn off the system, then reconnect the  
USB device.  
e music data itself contains noise, or  
the sound is distorted. Noise may have  
entered during the recording process.  
Delete the file, and try recording again.  
Are you using a supported USB  
device?  
If you connect an unsupported USB  
device, the following problems may  
occur. See “Compatible USB devices  
with this system” (page 34) for the  
supported device types.  
The USB device cannot be connected  
.
into the  
(USB) port  
e USB device is being connected  
backwards. Connect the USB device in  
the correct orientation.  
e USB device is not recognized.  
File or folder names are not  
displayed on this system.  
Playback is not possible.  
e sound skips.  
ere is noise.  
A distorted sound is output.  
Recording stops before it is finished.  
“Readingis displayed for an  
extended time, or it takes a long time  
before playback starts.  
e reading process can take a long  
time in the following cases.  
ere are many folders or files on the  
USB device.  
e file structure is extremely  
complex.  
e memory capacity is excessive.  
e internal memory is fragmented.  
us, we recommend following these  
guidelines.  
Total folders on USB device: 100 or  
less  
Total files per folder: 100 or less  
“Over Currentappears.  
A problem has been detected with the  
level of electrical current from the  
(USB) port . Turn off the system and  
remove the USB device from the  
(USB) port . Make sure there is no  
problem with the USB device. If this  
display pattern persists, contact your  
nearest Sony dealer.  
ꢀꢅGB  
Continued  
 
Erroneous display  
Files cannot be played back.  
Send the music data to the USB device  
again, as the data stored in the USB  
device may have been corrupted.  
e character codes that can be  
displayed by this system are numbers  
and alphabet only. Other characters are  
not displayed correctly.  
The audio file does not have the  
extension .mp3, “.wma, “.m4a.  
The data is not stored in MP3/WMA/  
AAC format.  
USB storage media formatted with file  
systems other than FAT16 or FAT32  
are unsupported.*  
If you use partitioned USB storage  
media, only files on the first partition  
can be played.  
Playback is possible up to 8 levels.  
The number of folders has exceeded  
999.  
The number of files has exceeded 999.  
Files that are encrypted or protected by  
passwords, etc. cannot be played back.  
The USB device is not recognized.  
Turn off the system and reconnect the  
USB device, then turn on the system.  
Connect the supported USB device  
(page 34).  
e USB device does not work  
properly. Refer to the USB device  
operation manual for how to deal with  
this problem. If the problem persists,  
contact your nearest Sony dealer.  
*
is system supports FAT16 and FAT32, but  
some USB storage media may not support all  
of these FAT. For details, see the operation  
manual of each USB storage media or  
contact the manufacturer.  
Play does not start.  
Turn off the system and reconnect the  
USB device, then turn on the system.  
Connect the supported USB device  
(page 34).  
Press (or USB  on the unit)  
to start play.  
Play does not start from the first  
track.  
Set the play mode to Normal Play  
mode.  
ꢀꢆGB  
 
Tuner  
To improve tuner reception  
Turn off CD player power by using the  
CD power management function. By  
default, CD power is turned on.  
Severe hum or noise, or stations  
cannot be received. (“TUNEDor  
“STEREOashes on the display.)  
to select the CD  
function, and then turn off the  
system.  
1
Press CD  
Connect the antenna properly.  
Find a location and an orientation that  
provide good reception, and then set  
up the antenna again.  
Keep the antennas away from the  
speaker cords, the power cord and the  
USB cable to avoid picking up noise.  
Connect a commercially available  
external antenna.  
Consult your nearest Sony dealer if the  
supplied AM antenna has come off the  
plastic stand.  
2
After “STANDBYstops flashing, press  
/  
on the unit while holding  
down   
on the unit.  
“CD POWER OFF” appears. With CD  
player power turned off, disc access  
time is increased. To turn on CD  
player power, repeat the procedure  
until “CD POWER ON” appears.  
Turn off nearby electrical equipment.  
To reset the system to factory settings  
If the system still does not operate  
properly, reset the system to factory  
settings.  
To change the AM tuning interval  
e AM tuning interval is factory-preset  
to 9 kHz (or 10 kHz, for some areas; this  
function is not available on the European  
and Russian models).  
Use buttons on the unit to reset the  
system to its factory default settings.  
1
Disconnect and reconnect the power  
cord, and then turn on the system.  
Use buttons on the unit to change the  
AM tuning interval.  
2
Press , VOL +  
and /  
at  
1
Tune in any AM station, and then  
turn off the system.  
the same time.  
All user-configured settings, such as  
preset radio stations, timer, and the  
clock, are deleted.  
2
While holding down ENTER , press  
/  
.
All the AM preset stations are erased.  
To reset the interval to the factory  
preset, repeat the procedure.  
ꢀꢇGB  
 
FLDR Full: e number of folders on the  
USB device has reached the maximum.  
Messages  
No Device: No USB device is connected  
or the connected USB device has been  
stopped.  
No Step: All of the programmed tracks  
or files have been erased.  
No Track: No playable file is loaded in  
the system.  
Not in Use: You have made an invalid  
operation.  
Not Supported: An unsupported USB  
device is connected.  
Please Wait: e system is readying for  
usage of an USB device.  
Protected!: You tried to record or erase  
a write-protected USB device.  
Reading: e system is recognizing the  
USB device.  
REC Error!: Recording did not start,  
stopped partway, or otherwise could  
not be performed (page 26).  
Removed: e USB device has been  
removed.  
Step Full!: You tried to program more  
than 26 tracks or files (steps).  
Storage Drive: An USB device is  
connected.  
CD/MP3 player, Tuner  
CD Over: You have reached the end of  
the disc while pressing   
during  
playback or pause.  
Complete!: e preset operation ended  
normally.  
LOCKED: e disc tray does not open.  
Contact your nearest Sony dealer.  
No Disc: ere is no disc in the system,  
or you have loaded a disc that cannot  
be played.  
No Step: All of the programmed tracks  
or files have been erased.  
Push SELECT!: You tried to set the clock  
or timer during timer operation.  
Push STOP!: You pressed PLAY MODE  
during playback.  
Reading: e system is reading  
information of the disc. Some buttons  
are not available.  
SET CLOCK!: You tried to select the timer  
when the clock is not set.  
SET TIMER!: You tried to select the timer  
when the Play Timer is not set.  
Step Full!: You tried to program more  
than 26 tracks or files (steps).  
Track Full: e number of files on the  
USB device has reached the maximum.  
TIME NG!: e Play Timer start and end  
times are set to the same time.  
USB device  
Complete!: e audio file or folder on  
the USB device has been erased.  
Device Full!: e USB device is full.  
Erase Error!: Erase of audio files or  
folders on the USB device failed.  
Error: e USB device could not be  
recognized or an unknown device is  
connected (page 28).  
Fatal Error!: e USB device has been  
disconnected while recording to or  
erasing audio files or folders on the  
USB device.  
ꢁ0GB  
 
 
Notes on discs  
Before playing, wipe the disc with a  
cleaning cloth from the center out to  
the edge.  
Do not clean discs with solvents, such  
as benzine thinner, or commercially  
available cleaners or anti-static spray  
intended for vinyl LPs.  
Do not expose discs to direct sunlight  
or heat sources such as hot air ducts,  
nor leave it in a car parked in direct  
sunlight.  
Precautions  
Discs that this system CAN play  
Audio CD  
CD-R/CD-RW (audio data/MP3 files)  
Discs that this system CANNOT play  
CD-ROM  
CD-R/CD-RW other than those  
recorded in music CD format or MP3  
format conforming to ISO9660 Level  
1/Level 2, Joliet or multisession  
CD-R/CD-RW recorded in  
multisession that have not ended by  
“closing the session”  
CD-R/CD-RW of poor recording  
quality, CD-R/CD-RW that have  
scratches or are dirty, or CD-R/CD-  
RW recorded with an incompatible  
recording device  
CD-R/CD-RW which is finalized  
incorrectly  
Discs containing files other than  
MPEG 1 Audio Layer-3 (MP3) files  
Discs of non-standard shape (for  
example, heart, square, star)  
On safety  
Completely disconnect the power  
cord (mains lead) from the wall socket  
(mains) if it is not going to be used  
for an extended period of time. When  
unplugging the unit, always grip the  
plug. Never pull the cord itself.  
Should any solid object or liquid get  
into the system, unplug the system, and  
have it checked by qualified personnel  
before operating it again.  
e AC power cord can be changed  
only by a qualified service facility.  
On placement  
Do not place the system in an inclined  
position or in locations that are  
extremely hot, cold, dusty, dirty, or  
humid or lacking adequate ventilation,  
or subject to vibration, direct sunlight  
or a bright light.  
Be careful when placing the unit  
or speakers on surfaces that have  
been specially treated (for example,  
with wax, oil, polish) as staining or  
discoloration of the surface may result.  
Discs that have adhesive tape, paper, or  
sticker attached to them  
Rental or used discs with attached seals  
where the glue extends beyond the seal  
Discs that have labels printed using ink  
that feels tacky when touched  
ꢁ1GB  
Continued  
 
 
If the system is brought directly  
from a cold to a warm location or is  
placed in a very damp room, moisture  
may condense on the lens inside the  
CD player, and cause the system to  
malfunction. In this situation, remove  
the disc, and leave the system turned  
on for about an hour until the moisture  
evaporates.  
Specifications  
Main unit  
Amplifier section  
European and Russian models:  
DIN power output (rated):  
18 + 18 watts (6 ohms at 1 kHz, DIN)  
Continuous RMS power output  
(reference): 25 + 25 watts (6 ohms at  
1 kHz, 10% THD)  
On heat buildup  
Heat buildup on the unit during  
operation is normal and is not cause  
for alarm.  
Do not touch the cabinet if it has been  
used continuously at a high volume  
because the cabinet may have become  
hot.  
Music power output (reference):  
38 + 38 watts (6 ohms at 1 kHz, 10%  
THD)  
Other models:  
DIN power output (rated):  
18 + 18 watts (6 ohms at 1 kHz, DIN)  
Continuous RMS power output  
(reference): 25 + 25 watts (6 ohms at  
1 kHz, 10% THD)  
Do not obstruct the ventilation holes.  
Inputs:  
On the speaker system  
AUDIO IN (stereo mini jack):  
voltage 250 mV, impedance  
47 kilohms  
is speaker system is not magnetically  
shielded, and the picture on nearby TV  
sets may become magnetically distorted.  
In this situation, turn off the TV, wait  
15 to 30 minutes, and turn it back on.  
If there is no improvement, move the  
speakers far away from the TV.  
(USB) port: Type A, maximum  
current 500 mA  
Outputs:  
PHONES (stereo mini jack): accepts  
headphones of 8 ohms or more  
SPEAKER: accepts impedance of  
6 ohms  
Cleaning the cabinet  
Clean this system with a soſt cloth  
slightly moistened with a mild detergent  
solution. Do not use any type of abrasive  
pad, scouring powder, or solvent, such as  
thinner, benzine, or alcohol.  
USB section  
Supported bit rate  
MP3 (MPEG 1 Audio Layer-3):  
32 320 kbps, VBR  
WMA: 32 192 kbps, VBR  
AAC: 48 320 kbps  
Sampling frequencies  
MP3 (MPEG 1 Audio Layer-3):  
32/44.1/48 kHz  
WMA: 44.1 kHz  
AAC: 44.1 kHz  
ꢁꢀGB  
 
 
CD player section  
General  
System: Compact disc and digital audio  
system  
Power requirements  
European and Russian models: 230 V  
Laser Diode Properties  
AC, 50/60 Hz  
Emission Duration: Continuous  
Laser Output*: Less than 44.6µW  
* is output is the value measurement  
at a distance of 200mm from the  
objective lens surface on the Optical  
Pick-up Block with 7mm aperture.  
Frequency response: 20 Hz 20 kHz  
Signal-to-noise ratio: More than 90 dB  
Dynamic range: More than 90 dB  
Mexican model: 120 V AC, 60 Hz  
Argentine model: 220 V AC, 50/60 Hz  
Other models: 120 V, 220 V, 230   
240 V AC, 50/60 Hz, adjustable with  
voltage selector  
Power consumption  
European model: 60 watts  
Other models: 63 watts  
Dimensions (w/h/d) (excl. speakers):  
Approx. 215 × 140 × 298 mm  
Tuner section  
Mass (excl. speakers): Approx. 3.9 kg  
FM stereo, FM/AM superheterodyne tuner  
Supplied accessories: Remote Commander  
(1), R6 (Size AA) batteries (2), AM loop  
antenna (1), FM lead antenna (1)  
FM tuner section:  
Tuning range:  
Design and specifications are subject to  
87.5 108.0 MHz (50 kHz step)  
Antenna: FM lead antenna  
Antenna terminals: 75 ohms unbalanced  
Intermediate frequency: 10.7 MHz  
AM tuner section:  
change without notice.  
Standby power consumption:  
0.5 W  
Halogenated flame retardants  
are not used in the certain  
printed wiring boards.  
Halogenated flame retardants  
are not used in cabinets.  
Tuning range  
European and Russian models:  
531 1,602 kHz (with 9 kHz tuning  
interval)  
Other models:  
530 1,710 kHz (with 10 kHz tuning  
interval)  
531 1,710 kHz (with 9 kHz tuning  
interval)  
Antenna: AM loop antenna, external  
antenna terminal  
Intermediate frequency: 450 kHz  
Speaker  
Speaker system: 2-way, 2-unit, bass-reflex  
type  
Speaker units: Woofer 10 cm, cone type,  
Tweeter 4 cm, cone type  
Rated impedance: 6 ohms  
Dimensions (w/h/d): Approx. 140 × 245 ×  
215 mm (with speaker grill)  
Mass: Approx. 1.9 kg  
ꢁꢁGB  
 
Notes  
When formatting the digital music player  
or USB device, be sure to format using the  
device itself or the dedicated formatting  
soſtware for that device. Otherwise, you may  
be unable to record the USB device properly  
on this system.  
Do not use USB devices other than these  
USB devices. Operation of models not listed  
here is not guaranteed.  
Compatible USB  
devices with this  
system  
You can use the following Sony USB  
devices on this system. Other USB  
devices are not playable/recordable on  
this system.  
Operation may not always be ensured even  
when using these USB devices.  
Some of these USB devices may not be  
Verified Sony digital music player (as  
of March 2008)  
available for purchase in certain areas.  
Notes on Walkman  
®
When transferring music to a Walkman  
®
Product name Model name  
using “Media Manager for WALKMAN,” be  
sure to transfer in MP3 format. Files in MP4  
format (AAC or VIDEO) are not displayed  
by this system.  
NWD-B103 / B103F /  
Walkman  
®
B105 / B105F  
NWZ-A815 / A816 /  
A818 / B103F / B105F  
When connecting a Walkman to the  
®
system, be sure to connect aſter the display  
“Creating Library” or “Creating Database” on  
NWZ-S515 / S516 /  
S615F / S616F / S618F  
the Walkman has disappeared.  
®
Check the websites below for the latest  
information about compatible devices.  
For customers in the U.S.A.:  
<http://www.sony.com/shelfsupport>  
For customers in Canada:  
ElectronicsSupport/>  
ElectronicsSupport/>  
For customers in Europe:  
<http://support.sony-europe.com/>  
For customers in Latin America:  
<http://www.sony-latin.com/index.crp>  
For customers in Asia and Oceania:  
<http://www.sony-asia.com/support>  
ꢁꢂGB  
 
 
ꢁꢃGB  
 
Printed in China  
 

Sierra Monitor Corporation Smoke Alarm 3140 01 User Manual
Sierra Wireless Saw 2400154 User Manual
Silvercrest Hair Dryer SRHT 1500 A1 User Manual
Soleus Air Air Conditioner SG WAC 25ESE C User Manual
Sony Ericsson Network Router EC400G User Manual
Sony Headphones MDR EX1000 User Manual
Sony Personal Computer PCV RXP RZP User Manual
Source Technologies Printer STM57W User Manual
Star Micronics Printer NR 10 User Manual
Sunbeam Kitchen Utensil 2785 33 User Manual